Vertical slide for PD 250/E and PD 400 lathes

rsz_dscf0406.jpg

SKU: 44202

$157.42 (AUD)

Shipping costs and GST (for Australian
customers) are calculated at checkout.

At last! Milling capability for Proxxon PD-lathe owners, adding the essential third axis of motion with millimeter slide calibration.

Relativity™ miniature vertical slide to suit Proxxon PD 250/E and PD 400 lathes. Remove the top-slide from your lathe, (one SHCS on the PD 250/E and 2 SHCS on the PD 400) exposing the tee-slotted table of the cross-slide. Our vertical slide comes with two sets of M5 tee nuts and screws to mount it on the Proxxon cross-slide. Fix your milling bit in the lathe chuck (or spindle collet) and you have XYZ milling capability.

40mm of vertical travel, controlled by a 1mm pitch leadscrew with laser-marked, metric calibrated handwheel.
One plain jaw and one clamping jaw can traverse the tee-slotted 95mm x 50mm slide table.
Maximum opening 70mm.
Heavy brass gib adjusts to dovetail with triple set-screws, for lifetime control of yaw-versus-friction.

Included components:

  • Vertical slide with laser-marked calibrated handwheel
  • Fixed and clamping jaws with mounting screws and square nuts
  • 2 x M5 SHCS and tee nuts for mounting the slide on the Proxxon

Technical specifications

  • 40mm vertical travel
  • Handwheel with fifty 0.02mm divisions on 1mm pitch leadscrew
  • 95mm x 50mm slide table
  • 1.73 kg weight on 58mm x 50mm cast-iron base
  • Dual counterbored mounting holes for M5 fixings (included)
Laser marked handwheel in 0.02mm divisions on 1mm pitch leadscrew
Laser marked handwheel in 0.02mm divisions on 1mm pitch leadscrew
Mounted on PD 400 cross-slide. Can be mounted on rotatable top-slide!
Mounted on PD 400 cross-slide. Can be mounted on rotatable top-slide!


All orders are subject to our terms and conditions of sale.